Paul Mueller Company Academy

2 minute read or watch

With multiple dimple sheets that need to be tacked and fit to the same tank head it can be difficult to get them to line up properly. Today, Jeremy is going to show you how to fit and trim dimple coil to a tank head.

There are a couple challenges you might face when trimming and fitting dimple sheets to a tank head.

• Challenge 1: The dimple doesn't lay down flat against the tank head.
• Challenge 2: It can be difficult to trim the dimple sheets to fit together correctly.

Here's how to overcome these two challenges:

3-A Sanitary Standards are the industry standards governing how food and beverage processing equipment is built and handled. They were originally developed by three different interest groups representing regulators, equipment manufacturers, and processors. These industry standards are developed and maintained by 3-A Sanitary Standards Inc. which is an independent organization dedicated to improving the design of food and beverage equipment for sanitary purposes. The 3-A Sanitary Standards were created to accomplish two goals - protecting food and beverage from contamination and ensuring all equipment parts and surfaces are cleanable.

This article is dedicated to identifying issues your plate heat exchanger (PHE) might be having, and setting you on the path to the right solution. Nearly all issues boil down to some form of plate fouling or gasket failure, but it’s important to determine whether it’s a one-time problem or an inherent flaw in your system (the PHE is specified incorrectly). The first step is to identify the symptoms of your underperforming heat exchanger.